5 Steps to Fix: Vape Tasting Burnt?

Introduction

Ever had a weird taste while vaping? You’re not alone. Many vapers, both newbies and seasoned users, have encountered that unsettling burnt or dry hit. It’s a frequent issue, but it can be prevented. In this guide, we’ll dive deep, explaining why it happens, and more importantly, how to avoid it for a smoother, more enjoyable vape experience.

Burnt Hit vs. Dry Hit: What’s the Difference?

	Burnt Hit	Dry Hit
Description	Tastes like burnt food, harsh with a lingering charred aftertaste.	Feels like inhaling warm air with just a hint of flavor. Not as harsh as a burnt hit.
Cause	Often due to an overheated coil that burns the wick inside the vape.	Happens when the wick isn’t adequately saturated with e-liquid.
Solution	Check the coil. Might need changing if it’s old or has been overheated.	Ensure your vape has enough liquid. Allow it a minute to soak in if you’ve just refilled it.
Prevention	Regularly check the coil’s condition and avoid vaping at extremely high wattages.	Regularly refill your tank and allow e-liquid to soak the wick before vaping.
Frequency	More common with older coils or when vaping at high power settings.	Can occur frequently if the tank isn’t refilled in time or if using thick e-liquids.
Effect on Device	Can reduce the lifespan of the coil and may require more frequent replacements.	Less damaging to the device but can reduce the quality of the vaping experience.
Signs	Persistent burnt taste regardless of e-liquid level.	Weak or muted flavor, especially soon after refilling the tank.

Common Causes of Unpleasant Vape Tastes

Vaping should be a treat for your taste buds. But sometimes, it’s not. Let’s look at some reasons why your vape might not taste as good as it should.

A. Low E-Liquid Level Think of your vape like a car. Cars need gas to run, and vapes need liquid. If there’s not enough liquid, things can get heated, and not in a good way. Always keep an eye on your liquid level and top it up when it’s running low.

B. High Power Setting Using a high power setting can be like cooking on high heat. It might get things done faster, but it can also burn your food—or in this case, your vape liquid. If things taste burnt, try turning down the power a bit.

C. Chain Vaping Taking puff after puff without a break can overheat your vape. It’s like running non-stop; you’ll get tired quickly. Give your vape a short break between puffs to keep things cool.

D. Thick E-Liquids Some vape liquids are thicker than others. Thick liquids can be like a thick sauce; they take longer to heat up and spread around. If you’re using a thick liquid, make sure it has time to soak into the wick properly.

Remember, a good vape experience is all about balance. Keep things in check, and you’ll have a tasty vape session every time.

Step 1: Check Your Vape Coil 

To ensure your vaping experience remains burn-free, regular inspection and maintenance of the vape coil are essential. Here’s how to check:

• Visual Inspection: Look for any signs of residue build-up or apparent burns on the coil. Discoloration is a common indicator that it’s time for a replacement.
• Taste and Performance: Notice any changes in flavor or vapor production. A decline in these aspects often signals coil degradation.
• Regular Replacement: Coils should be replaced periodically, depending on usage frequency. A general rule is to change them every 1-2 weeks.

A well-maintained coil not only prevents unpleasant burnt tastes but also enhances the overall quality of your vaping experience.

Step 2: Proper E-Liquid Level Maintenance 

Maintaining the correct e-liquid level is crucial in avoiding a burnt vape taste. E-liquids are what generate the vapor, and low levels can lead to dry hits and burning:

• Regularly Check Levels: Always ensure your e-liquid doesn’t fall below the minimum mark on the tank. This prevents the wick from drying out.
• Refill Before Running Low: Don’t wait until your tank is completely empty. Refill when you notice the liquid getting low to maintain a consistent saturation of the wick.
• Mind the Wick: Allow the wick enough time to soak up the e-liquid, especially after a refill. Rushing into vaping post-refill can lead to dry hits.
• Tank Cleaning: Regular cleaning of your tank helps prevent residue buildup which can affect e-liquid absorption and flavor.

These steps help in preserving the flavor of your e-liquid and ensure a smooth vaping experience without the unpleasant burnt taste.

Step 3: Mind the Wattage and Temperature Settings

Understanding your device’s limitations is key when managing wattage and temperature settings for ideal vaping. Get to know the suggested wattage for your coil and make sure not to go over it to avoid getting burnt. It is recommended to begin with the lower end of the recommended range and gradually adjust to reach your desired balance of flavor and vapor output while safeguarding the coil from potential harm.

Moreover, it is essential for individuals who have temperature control options on their gadgets to adjust it to a safe and advised level. It is advisable to regularly inspect and modify these settings, particularly when there are observable alterations in taste or vapor production. Effective management of these settings improves your vaping experience and also prolongs the life of your device and coil.

 Step 4: Prime New Coils Before Use

Priming new coils is a critical step to prevent the unpleasant burnt taste in vapes. To prime a coil, start by applying e-liquid directly onto the wick until it’s fully saturated. Once the coil is installed and the tank filled, it’s essential to let it rest for a few minutes, allowing the e-liquid to thoroughly soak into the wick. Begin vaping at a lower wattage, then gradually increase to your desired level. This process ensures that the coil is properly saturated, reducing the risk of burning and enhancing the overall flavor and lifespan of the coil.

Step 5: Consider the Type of E-Liquid

The e-liquid type can impact your vaping experience:

• Check VG/PG Ratio: High VG e-liquids are thicker and may require more power to heat, while high PG liquids are thinner and heat faster.
• Be Flavor Conscious: Certain flavors can be more prone to causing a burnt taste at high temperatures.

Choosing the right e-liquid enhances the overall vaping quality.

Conclusion

Preventing a burnt flavor in your vape involves regularly checking coils, keeping e-liquid levels up, using correct settings, priming coils, and choosing e-liquids carefully is essential. These measures enhance both the flavor and lifespan of your vaping device, guaranteeing a consistently pleasant experience. Don’t forget, consistent upkeep and paying attention to your vape’s requirements are the keys to a fulfilling vaping experience.

FAQ